Caller Id Function - Clarity XLC3.4 Guia Del Usuario

VOLUME & TONE ADJUSTMENTS
XLC3.4

CALLER ID FUNCTION

XLC3.4
Your XLC3.4 is CID / CWCID compatible (optional service, purchased from your
local telephone service provider).
When your phone is ringing, the screen shows the name and number of the person
calling you. This information will be stored in the Caller List on your phone.
To access this list, and for further details regarding this function, press UP or
DOWN in standby mode, and / or follow the instructions under CALLER LIST
(page 20).
NOTE: If you have CID service, the date and time will automatically be set after
the first incoming call.
In order to achieve the best audio experience, we
recommend the following:
1. Adjust the Volume Control and enable the Boost
function (if needed). (Lower the volume level to minimum
(VOL 0) before activating the Boost feature.)
2. Press the TONE button to toggle between the available
tone settings.
Speakerphone
To switch to speakerphone mode, press the SPK button

.
The display shows the speakerphone mode (see page 18).
E
N
G
L
I
S
H
19