Max Turn-On Level - ATON DHTP1 Manual Del Usario

DHTP1 Amplifi ed Touch Pad Controller

Max Turn-On Level

In order to guard against unexpected high volume
levels when the system is turned on, a maximum
turn-on volume level can be set for each touch pad.
If the volume level prior to turning the room off is
lower or equal to the max turn-on volume level, the
room will come back on at the last volume level. If
the volume level prior to turning off is higher than the
max turn-on volume level, the room will come back
on at the max turn-on volume level instead of the last
volume level. See Figure 4.3 for details.
To adjust the Max Turn-On volume level:
1. Press and hold the PROGRAM button
then press "VOL ▲" at the area indicated
The Volume Bar
max turn-on volume level.
2. Press VOL UP or DOWN
turn-on volume level.
3. Once the max turn-on volume level has been set,
press the PROGRAM Button again
will be saved and the Touch Pad will exit
Setup Mode.
© 2007 • All rights reserved.
3 will display the existing
4 to adjust the max
1
2
. Settings
1
23