ATON DHTP1 Manual Del Usario página 36

Balance - The Volume Indicator Bar
indicates Balance Settings. The middle posi-
tion is center (equal balance) and is the factory
Default position. Use the Volume Up/Down but-
tons 5 to adjust Balance.
5. DRC On/Off - The Volume Bar
Dynamic Range Compression On/Off status.
The far left position indicates that DRC is Off
(Factory Default). The far right position indicates
that DRC is On. Use the Volume Up/Down
buttons 5 to select between DRC On/Off.
6. Loudness On/Off - The Volume Bar
cates Loudness On/Off status. The far left
position indicates that Loudness is Off (Factory
Default). The far right position indicates that
Loudness is On. Use the Volume Up/Down
buttons 5 to select between Loudness On/Off.
7. Press the indicated area
and exit Tone Control mode.
30
DHTP1 Amplifi ed Touch Pad Controller
1 for to save settings
©2007 • All rights reserved.
4
4 indicates
indi-
4