Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
DHTP1 Amplifi ed Touch Pad Controller
Tone Control Mode
Tone Control Mode allows for adjustment of audio
Tone settings including Bass, Treble Balance, Dynam-
ic Range Compression and Loudness. See Figure 4.5
on Page 29 for details.
To adjust Tone Control settings:
1.
Press and hold the area indicated
onds to enter Tone Control Mode. The Source 1
LED will blink rapidly.
2.
Each Source Number
Control setting.
Source Number
1
2
3
4
L
3.
Use the Source Left/Right Button
between the Sources 1-L for the desired
Tone Control setting.
4.
Bass/Treble - The Volume Indicator Bar
indicates Bass/Treble Settings. The middle posi-
tion is flat (no boost or cut) and is the factory
Default position. Use the Volume Up/Down but-
tons
5
to adjust Bass/Treble.
© 2007 • All rights reserved.
represents a Tone
2
Tone Control Setting
Bass Adjustment
Treble Adjustment
Balance
Dynamic Range Compression
Loudness On/Off
1
for 3 sec-
3
to select
4
29
Publicidad
Capítulos
Tabla de contenido
