Source Lock Out - ATON DHTP1 Manual Del Usario

DHTP1 Amplifi ed Touch Pad Controller

Source Lock Out

This setting determines which sources can be se-
lected in the zone in which the DHTP1 is installed, al-
lowing for parental control. By default, all connected
sources can be selected. See Figure 4.3 for details.
To Lock out sources:
1. Press and hold the PROGRAM button
press "Source" at the area indicated
The Source 1 indicator
sources 2-4 will be lit solid.
2. Press Source Left/Right
to be locked out. When a source is selected, it
will blink rapidly.
3. To lock out the selected source, press Volume
Down 5 . The source LED will blink slowly,
indicating that it is locked out and not available
for selection. If a source is locked out but not
selected, the source LED will be blank. Once it is
selected again, it will blink slowly.
4. Repeat this process for each source that is to be
locked out.
5. To Unlock a source, select a locked source, then
press Volume Up
rapidly once unlocked.
© 2007 • All rights reserved.
3 will blink rapidly, and
4 to select a source
. The source LED will blink
6
1 then
.
2
25