ATON DHTP1 Manual Del Usario página 45

DHTP1 Amplifi ed Touch Pad Controller
Symptom Cause
Source(s) not play-
ing audio
Zone is in MUTE
Multi-channel digi-
tal audio formats
(5.1, 7.1 etc.) are
not supported by
the DHTP1, DHSIP,
DH44, etc.
Distorted Source Input Gain
audio too high on DH44 or
DHSIP
Defective/Incom-
patible speaker
© 2007 • All rights reserved.
Solution
Verify that source(s)
turned ON, playing audio,
etc. Check Tape Monitor
settings on A/V or Stereo
Receiver.
Check MUTE Indicator
LED on DHTP1.
Change Audio Source-
Digital Output to PCM
Stereo
Reduce GAIN DIP switch
settings on DH44 or
DHSIP
Check for damaged
speaker.
39