Installation - Agilent Technologies TwisTorr 84 FS AG Serie Manual De Instrucciones

Ocultar thumbs Ver también para TwisTorr 84 FS AG Serie:
Tabla de contenido

Publicidad

16
Instructions for Use

Installation

Installation

Do not install or use the controller in an environment exposed to
atmospheric agents (rain, snow, ice), dust, aggressive gases, or in
explosive environments or those with a high fire risk. During
operation, the following environmental conditions must be complied
with:
WARNING!
For user safety, the TwisTorr 84 FS AG Navigator must be powered by a 3-
wire power cord (see orderable parts table) and plug (internationally
approved). Always use this power cord and insert the plug in a socket with a
suitable ground connection to avoid electrical shock and to comply with EC
requirements . The high voltage developed inside the controller can cause
severe injury or death. Before installing or servicing the unit, always
disconnect it from the socket.
WARNING!
Refer to the relevant pump manual to operate it in a safe way before starting.
136/192
temperature: from + 5 °C to +45 °C
relative humidity: 0 – 90 % (non-condensing)
TwisTorr 84 FS AG Navigator Controller User Manual / 87-901-038-01 (A)

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

X3509-64000X3509-64001

Tabla de contenido