Communication Protocol - Agilent Technologies TwisTorr 84 FS AG Serie Manual De Instrucciones

Communication Protocol

The communication protocol is of the MASTER/SLAVE type where:
The communication is performed in the following way:
1.
2.
The MESSAGE is a string with the following format:
<STX>+<ADDR>+<WIN>+<COM>+<DATA>+<ETX>+<CRC>
were:
When data is indicated between double quotes ("..."), this means that the data
NOTE
indicated is the corresponding ASCII character.
When a number is indicated with Ox prefix it means it is an hexadecimal
number (16 base coded).
TwisTorr 84 FS AG Navigator Controller User Manual / 87-901-038-01 (A)
Host = MASTER
Controller = SLAVE
the host (MASTER) sends a MESSAGE + CRC to the
controller (SLAVE);
the controller replies with an ANSWER + CRC to the host.
Technical Information
Description
175/192
17