General Information - Agilent Technologies TwisTorr 84 FS AG Serie Manual De Instrucciones

16 Instructions for Use

General Information

General Information

This equipment is destined for professional use. Before operating the
equipment, the user should read this instruction manual and any
other additional information supplied by Agilent. Agilent declines
any responsibility for non-compliance, even partial, with these
instructions, improper use by untrained persons, unauthorized
repairs of the equipment or use not complying with specific national
standards. The TwisTorr 84 FS AG Navigator controller is suitable
for use with TwisTorr 84 FS pumps. It is equipped with auxiliary
connectors that make it possible to power an additional fan, to
control the vent valve and for remote operation of the Navigator by a
host computer connected on a serial line (RS-232 or RS-485). The
following paragraphs contain all the information necessary to
guarantee operator safety when using the equipment. For detailed
information, refer to the "Technical Information" appendix.
The following conventions are adopted in this manual:
Caution messages are displayed before procedures which, if not followed, may
CAUTION!
cause damage to the equipment.
WARNING! Warning messages are intended to draw the operator's attention to a
particular procedure or practice which, if not followed correctly, may cause
serious injury.
The notes contain important information taken from the text.
NOTE
134/192 TwisTorr 84 FS AG Navigator Controller User Manual / 87-901-038-01 (A)