Agilent Technologies Special Turbo-V 1K-G Manual De Instrucciones página 236

17 Technical Information
Window-Meanings
1. Automatic means that when the controller stops, the vent valve is opened
NOTE
2. On command means that the vent valve is opened or closed by means of
Figure 19
236/258
with a delay defined by window n. 126; when the controller starts, the vent
valve is immediately closed.
window n. 122.
7 6
TOO HIGH LOAD
SHORT CIRCUIT
OVERVOLTAGE
AUX FAIL
Window N. 206 Bit Description
Special Turbo-V 1K-G User Manual / 87-901-006-01 (A)
5 4 3 2 1 0
NO CONNECTION
PUMP OVERTEMP.
CONTROLL. OVERTEMP.
POWER FAIL