Bartscher C4431D Manual De Instrucciones página 56

Key TIME
By pressing the TIME key, the value in the display TIME / MOISTURE starts flashing
and using the INCREASING or REDUCING key it is possible to change the value.
The LED TIME is lighting.
The adjustable time ranges from 00 hours and 01 minutes up to 15 hours and
59 minutes.
When falling below the minimum value from 00 hours and 01 minutes you get
into the mode:
END: it is used in the course of cooking according to the program
-
in order to deactivate unnecessary the phases.
INF: it means "infinite time". The convection oven remains with the set
-
parameters in operation until the START / STOP key is pressed.
Through waiting 5 seconds or pressing the TIME key the new value is saved.
In the course of cooking, the display TIME / MOISTURE indicates, in backward
running, the time in hours, minutes, seconds. It is possible to convert the value into
infinite time (INF) and vice versa.
Key STEAMING
It enables to perform the steaming in the course of cooking in manual manner or
setting the different moisture levels during cooking with use of programs.
Steaming in the course of cooking in manual manner:
-
by pressing the STEAMING key during cooking the steam is generated in the
cooking space, as long as this key remains pressed. The LED STEAMING is
lighting. In the case of reverse rotation of the motor the steaming is temporarily
interrupted.
Automatic steaming in the course of cooking with use of programs:
-
after pressing the STEAMING key it is possible to set, using the keys
INCREASING or REDUCING, the desired moisture level. The adjustable
moisture ranges are
OFF – 20% - 40% - 60% - 80% - 100%.
In the course of setting the values are flashing in the display TIME / MOISTURE
and by pressing again the STEAMING key they are saved.
During cooking, the STEAMING LED turns on when the steam is generated in
the cooking space. When a pause occurs, it flashes by contrast. In the case of
the reverse rotation of the engine, the steaming is temporarily interrupted.
- 52 -