Fitting The Wrist Strap; Battery Installation - Leica Rangemaster 900 scan Instrucciones

Fitting the wrist strap

Push the smaller loop through the eyelet (4) on
the housing of the Leica Rangemaster Then,
thread the longer loop through the smaller loop
and pull it tight so that the strap is securely
attached round the eyelet on the housing
battery Use a coin, to open the battery com-
partment cover and insert the battery with the
contacts facing up Ensure that the battery con-
tacts line up with the terminals on the connector
Finally, push the connector home
13

Battery installation

The energy supply for the
Leica Rangemaster
is a 9 V energy block
(type E-Block e g 6LR61,
6AM6, etc) We recom-
mend using an alkaline