Fitting The Wrist Strap; Battery Installation - Leica RANGEMASTER 900 scan Instrucciones

Fitting the wrist strap

Push the smaller loop through the eyelet (4) on
the housing of the Leica Rangemaster. Then,
thread the longer loop through the smaller loop
and pull it tight so that the strap is securely
attached round the eyelet on the housing.
All manuals and user guides at all-guides.com

Battery installation

The energy supply for the Leica Rangemaster
is a 9 V energy block (type E-Block e.g. 6LR61,
6AM6, etc.). We recommend using an alkaline
battery. Use a coin, to open the battery com-
partment cover and insert the battery with the
contacts facing up. Ensure that the battery
contacts line up with the terminals on the
connector. Finally, push the connector home.
13