Amprobe MultiTest 1000 Manual Del Usuario página 16

4.1.2.1. Mode "AUTO"
At the end of the test, if the average
resistance value Ravg is less than 5Ω
the instrument emits a double beep
indicating the positive outcome of the
test and displays a screen similar to the
screen alongside.
SAVE
SAVING:
4.1.2.2. Mode "R+TIMER" or "R-TIMER"
If during the test a resistance value
R+Timer or R–Timer less than 5Ω was
detected, the instrument (after the set
time has elapsed) emits a double beep
indicating a positive outcome of the
test & displays a screen similar to the
screen alongside.
+
The symbols R
SAVE
SAVING:
The test results can be stored pressing the SAVE key twice
(refer to paragraph 5.1).
-
or R are displayed.
The test can be stored pressing the SAVE key twice (refer to
paragraph 5.1).
Ω
CAL LOW
.07
Ω
219
mA
AUTO
Ω
CAL LOW
.08
Ω
219
mA
5
s
R+
R-
TIMER
Average
resistance value
Ravg.
Average test
current value
Iavg.
Duration time of
the test.
Value of the test
current I+ or I-.