Reset Of The Instrument And Default Parameters; Reset Procedure; Default Parameters - Amprobe MultiTest 1000 Manual Del Usuario

6. RESET OF THE INSTRUMENT AND DEFAULT PARAMETERS

BEFORE OF A RESET PROCEDURE DOWNLOAD THE STORED TESTS ON A PC
6.1.

RESET PROCEDURE

1. Press the DISP, CLR, RCL keys and then ON/OFF key.
2.
The
displayed for 5 seconds, after
which the instrument emits a beep
and then displays the screen
relative to the function selected
with the rotary switch.
ATTENTION:
6.2.

DEFAULT PARAMETERS

After a RESET the default parameters set on the instrument are:
Function
LOWΩ
R
ISO
EARTH ρ
Memory
screen alongside
the reset procedure will cancel all the stored tests and it will set the
default parameters in the instrument.
Parameter
Mode
Calibration Offset
Mode R+/R- TIMER
Mode
Test voltage
Mode TIMER
Parameter DIST
Parameter PLA
Memory state
is
es
RESET default parameter
AUTO
0
TIMER is set at 1s
MAN
500V
TIMER is set at 60s
DIST = 1
P = 1
0