Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
5.2.
RECALL: "RCL" KEY
If you want to recall the stored test results proceed as follows:
RCL
1.
Press the RCL/ESC key.
ESC
2.
Use the
displayed.
3.
Press the DISP key to display the test result related to the selected
DISP
memory location.
4.
Use the
memory locations.
RCL
Press RCL/ESC key at any time to leave the memory menu and go back
ESC
to the measurement selected.
If the memory of the instrument is not
empty it displays the screen alongside.
Number of the memory location in which the
measurement result was stored.
Value of the parameter PLA related to the
saved measurement
&
keys to select the memory location number to be
&
keys again if you want to display again the numbers of
MEM
3
Pla
02
Publicidad
Capítulos
Tabla de contenido
