Memory Recall - smartheart 01-5025 Manual De Instrucciones

TAKING YOUR BLOOD PRESSURE READING
YOU CAN STOP THE INFLATION OR DEFLATION PROCESS AT ANY
TIME BY PRESSING THE START/STOP BUTTON.
8. When the measurement is complete, your blood
pressure measurement and pulse will display
simultaneously on the screen, Fig 3.
9. Select START/STOP to turn the unit off and
conserve energy and battery life.
10. The unit will automatically shut-off approximately
3 minutes after use.
11. Disconnect the cuff and tubing prior to storage.

MEMORY RECALL

This monitor will save only the last measurement result
for review.
1. When the monitor is OFF, press and hold the
START/STOP button for 3+ seconds.
2. The display will show the last measurement taken.
3. The unit will automatically shut-off approximately
3 minutes after use; press the START/STOP button
to turn the unit off as desired.
NOTE: If the batteries are replaced or expire, the
last measurement will be deleted.
mmHg
Fig. 3
mmHg
ENGLISH • 13