Sanus VMPL3 Manual De Instrucciones página 9

4 Select TV Hardware and Mount TV Brackets
4-1 Select the hardware diameter and length
A
4-2 Attach brackets to a TV with a flat back
6901-002348 00
Your TV type will help you determine which hardware configuration
to use. Match your type of TV to the suggested hardware
configuration on the next page.
A. Installation option without spacers (TVs with flat backs)
B. Installation option using spacers (TVs with irregular backs)
Hand thread screws into the threaded inserts on the back of your TV
to determine the correct screw diameter (M4, M5, M6, or M8).
CAUTION:
Avoid potential personal injuries and property
damage! Verify that there are adequate threads to secure the
brackets to the TV. If you encounter resistance, stop immediately
and contact customer service. Use the shortest screw and spacer
combination to accommodate your needs. Using hardware that is
too long may damage your TV.
B
Confirm that the brackets are level on the back of the TV.
If you require additional space for cables, recesses, or protrusions,
choose one of the following configurations.
Tilting brackets are shown. Complete the same steps if you chose
the low profile brackets.
Standard configurations are shown. For special applications, or if
you are uncertain about your hardware selection, contact Customer
Service.
M4/M5/M6/M8
[13, 14, 15, 16, 17, 18]
[23, 24]
9