11 Warranty; Conditions; Exclusions And Limitations - Sime ECOMAXI 160ErP Manual De Instrucciones

Installation, use and maintenance manual

11 WARRANTY

Should the appliance require work under warranty,
please contact your local authorised service
centre. The relevant addresses are provided in the
usage manuals for our products and online. To
avoid any inconvenience, we suggest that you
read the instruction manual carefully before
requesting work under warranty.
11.1
Warranty
This warranty covers the product it came with at
the time of purchase.
Under this warranty, the product is guaranteed
against any material or manufacturing defects for
a period of TWO YEARS as of the original date of
purchase.
Should you encounter
manufacturing defects during this period under
warranty (based on the original purchase date),
we shall endeavour to repair or replace the
product or its defective parts within the terms and
conditions stated below, at no cost for labour or
replacement parts.
The support service reserves the right to replace
defective products or
reconditioned products or parts. All replaced
products and parts shall become the property of
the MANUFACTURER.
11.2

Conditions

 Work performed under warranty shall only be
performed if the
presented within the period covered by the
warranty, together with the original sales
invoice or sales receipt (showing the date of
purchase, type of product and name of the
retailer). The MANUFACTURER reserves the right
to refuse the work under warranty where these
documents are not presented or where the
information is incomplete or illegible. This
warranty shall lapse where the model or serial
number shown on the product has been
altered, crossed out, removed or is illegible.
 The following are excluded from this warranty:
e) Regular maintenance work, and repairs or
replacements of parts for wear and tear;
f) Consumables (components that are expected
to require regular replacement during the
useful life of the product, for example tools,
lubricants, filters, etc.).
g) Damage or defects caused by incorrect
employment, use or treatment of the product,
for purposes other than normal use;
h) Damage or modifications to the product as a
result of:
Incorrect use, including:
any material or
parts with new or
defective product is
 Treatment causing
aesthetic or superficial alterations to the
product;
 Incorrect installation or use of the product for
purposes other than those specified or failure
to observe the installation and use instructions;
 Incorrect product maintenance that does not
comply with the
maintenance;
 Installation or use of the product that does not
comply with the technical or safety regulations
in force in the country where the product is
installed or used;
 Conditions or defects in the systems to which
the product is connected or into which it is
incorporated;
 Repairs or attempts to repair the product by
unauthorised personnel;
 Adaptations or modifications made to the
product without prior written authorisation from
the manufacturer, updates to the product
exceeding the specifications and functions
described in the
changes made to the product to make it
compliant with national or local technical or
safety regulations in countries other than the
ones for which the product was specifically
designed and manufactured;
 Negligence
 Accidental events, fires, liquids, chemical
substances or substances of another nature,
flooding,vibrations,
inadequate ventilation, surges in current,
excessive or incorrect input supply voltage,
radiations, electrostatic charges, including
lightning, other forces and external impact.
11.3

Exclusions and limitations

Notwithstanding what
MANUFACTURER does not issue any product
guarantee (explicit, implicit, statutory or of any
other nature) regarding quality, performance,
accuracy, reliability or suitability for a particular use
or similar.
Should this exclusion not be permitted fully or in
part by the applicable law, the MANUFACTURER
excludes or limits its own guarantees to the
maximum limit permitted by the applicable law.
Any guarantee that
excluded shall be limited (within the terms
permitted by the applicable law) to the duration
of this warranty.
The MANUFACTURER'S only obligation in the
context of this warranty consists in repairing or
replacing products in accordance with the terms
and conditions of
MANUFACTURER declines all responsibility for loss or
damage in relation to the product, services, this
warranty or similar,
MANUAL CODE: 6328407
damage or physical,
instructions on correct
instruction manual,
excessive heat,
is stated above, the
cannot be completely
this warranty. The
including economic
Page 72 / 148
or
or