Handling And Transportation - Sime ECOMAXI 160ErP Manual De Instrucciones

Installation, use and maintenance manual
2

HANDLING AND TRANSPORTATION

The appliance is supplied in a cardboard box (*). It
is fixed to a pallet with three screws.
For unloading, use a forklift or pallet jack that
supports up to 250 kg.
The packaged
appliance can be
rested horizontally on
its rear side to make it
easier to unscrew the
screws.
The appliance must
be unpacked
carefully so as not to
damage the casing if
using knives or cutters
to open the
cardboard
packaging.
After the packaging
has been removed,
check that the unit is in one piece. If in doubt, do
not use the appliance and contact an authorised
technician.
Before disposing of the packaging, in line with the
environmental protection regulations in force,
ensure that all of the accessories supplied have
been removed from the packaging.
WARNING: all
(staples, cardboard, etc.) should not be left
within the reach of children as they are
dangerous.
(*) Note: the type of packaging may vary at the
manufacturer's discretion.
While the appliance is not in use and waiting to be
commissioned, it should be positioned in a place
that is sheltered from the weather.
packaging components
MANUAL CODE: 6328407
Page 41 / 148