en
36 | MS 63 | Decommissioning
6.3
Spare and wearing parts
Denomination
Mounting tool adhesive tag
Electrical tensionadhesive tag
Bead breaker adhesive tag
Tilting column adhesive tag
Lanes protection
Bead breaker blade screw
Mounting tool
Protection tab
Mounting tool cover
Sliding cover tablet
Bead breaker blade
|
1 695 106 288
2013-10-30
7.
7.1
Order code
1 695 100 982
Procedure:
1 695 100 789
1. Disconnect electrical connection.
1 695 100 983
2. Disconnect pneumatic connection.
1 695 100 776
3. Dismantle the column switch and lean it at the side.
1 695 101 402
4. Follow what shown for first start up (see chap. 4.2).
1 695 103 347
5. Fix again the MS 63 with its 3 screws on the pallet
1 695 102 647
(see chap. 4.2).
1 695 101 608
1 695 102 725
i
In case of sale or transfer of MS 63, all the docu-
1 695 100 815
ments included in the consignment volume has to be
1 695 100 897
integrally handed over together with the equipment.
7.2
If the MS 63 is going to be stopped for a limited period
of time or if the equipment is not being used for other
reasons, always disconnect the network plug from its
socket!
It is suggested to clean accurately the MS 63, also its
tools and accessories, and carry out a protection tre-
atment (e.g. spraying of a thin oil film).
7.3
¶
Disconnect the MS 63 from the mains tension and
take off the power supply cable.
¶
Oil are water pollution risk fluids and have to be
disposed of in accordance with the rules in force.
¶
Disassemble the MS 63, order the materials accor-
ding to the category it belongs to and dispose of
them according to the rules in force.
Decommissioning
Place change
Temporary decommissioning
Disposal
MS 63 complies to the rules of the Europe-
an directive 2002/96/CE (directive on the
disposal of electrical and electronic waste).
Electric and electronic devices which are out
of order, together with their cables, accesso-
ries, accumulators and batteries, have to be
disposed of separately from household waste.
¶
For disposal of such products, use the
available return and collection systems.
¶
The correct disposal of the MS 63 makes
it possible to avoid environmental damage
and to put at no risk the life of people.
Beissbarth GmbH