Servicing the On/Off and Blade
Brake System
The motor and blade are designed to stop within 3
seconds after you release the control bar. Ensure that
the control bar functions properly each time before
you operate the mower. If the blade does not stop
within 3 seconds or there is a grinding or scraping,
metal-to-metal noise when you release the control bar,
contact an Authorized Toro Service Dealer. This same
recommendation applies if you observe heavy vibrations
when using the mower.
Storage
Store the mower in a cool, clean, and dry place away
from children. Cover the mower to keep it clean and
protected.
Figure 25
1. Clean the mower housing.
2. Check the condition of the blade.
12