Sound Power; Hand-Arm Vibration; Waste Of Electrical/Electronic Equipment (Weee); Safety And Instructional Decals - Toro Eurocycler 34cm Manual Del Operador

Sound Power

This unit has a guaranteed sound power level of 96 dBA,
which includes an Uncertainty Value (K) of 1 dBA.
Sound power level was determined according to the
procedures outlined in ISO 11094.

Hand-Arm Vibration

Model 21080
Measured vibration level for left hand = 3.1 m/s
Measured vibration level for right hand = 2.2 m/s

Waste of Electrical/Electronic Equipment (WEEE)

• EU directive 2002/96/EC classifies this product as an electrical or electronic tool.
• Do Not dispose of this tool as unsorted municipal waste.
• Dispose of this tool at a collection or recycling center according to local and national law.
• The consumer has an important role in reducing the disposal of waste by returning waste electronic/electrical
tools for recycling.
• Recycling avoids the dispersion of hazardous materials into the municipal waste stream.
• The crossed-out bin symbol reminds the user not to dispose of this product as unsorted municipal waste.

Safety and Instructional Decals

Important: Safety and instruction decals are located near areas of potential danger. Replace damaged or
lost decals.
1. Off
2. On
3. To engage the mower, press and hold the button while
pulling back on the control bar.
110-1168
Uncertainty Value (K) = 1.6 m/s
Measured values were determined according to the
procedures outlined in EN 1032.
Model 21090
Measured vibration level for left hand = 3.0 m/s
Measured vibration level for right hand = 1.7 m/s
Uncertainty Value (K) = 1.5 m/s
Measured values were determined according to the
2
procedures outlined in EN 1032.
2
1. Warning—read the Operator's Manual.
2. Thrown object hazard—keep bystanders a safe distance
from the machine.
3. Attention, do not touch rotating blade! Disconnect
power cord and read the instructions before servicing or
performing maintenance.
4. Electric shock hazard—keep the machine out of the rain
and other wet conditions.
5. Electrical hazard, cutting of electrical cord—do not push the
machine over the power cord.
3
2
2
110-8417
2
2