Maytag MHN33PDCWW Instrucciones De Instalación página 12

CODE
5. 00 TIME-OF-DAY CLOCK, MINUTES
5. 00 This is the TIME-OF-DAY CLOCK, minute setting;
select 0–59 minutes by pressing the LOWER LEFT key
pad.

Press the LOWER MIDDLE key pad once to advance
to next code.
6. 00
TIME-OF-DAY CLOCK, HOURS
NOTE: Uses MILITARY TIME or 24 hr. clock.
6. 00 This is the TIME-OF-DAY CLOCK, hour setting; select
0–23 hours by pressing the LOWER LEFT key pad.
Press the LOWER MIDDLE key pad once to advance

to next code.
7. 00
SPECIAL PRICE START HOUR
NOTE: Uses MILITARY TIME or 24 hr. clock.
7. 00 This is the start hour; 0–23 hours. Select START
HOUR by pressing the LOWER LEFT or UPPER
LEFT key pad.

Press the LOWER MIDDLE key pad once to advance
to next code.
8. 00
SPECIAL PRICE STOP HOUR
NOTE: Uses MILITARY TIME or 24 hr. clock.
8. 00 This is the stop hour; 0–23 hours. Select STOP HOUR
by pressing the LOWER LEFT or UPPER LEFT key
pad.

Press the LOWER MIDDLE key pad once to advance
to next code.
9. 10 SPECIAL PRICE DAY
9. 10 This represents the day of the week and whether
special pricing is selected for that day. A number
followed by '0' indicates no selection that particular day
(9.10). A number followed by an 'S' indicates selected
for that day (9.1S).
Days of the week (1–7) are selected by pressing
the LOWER LEFT key pad. Press the UPPER RIGHT
key pad once to select special pricing for each
day chosen.
When exiting set-up code '9', the display must show
current day of week:
DISPLAY DAY OF WEEK
10 Day 1 = Sunday
20 Day 2 = Monday
30 Day 3 = Tuesday
40 Day 4 = Wednesday
50 Day 5 = Thursday
60 Day 6 = Friday
70 Day 7 = Saturday

Press the LOWER MIDDLE key pad once to advance
to next code.
A. 00
VAULT VIEWING OPTION
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
A. 00 Not Selected 'OFF'.
A. SC Selected 'ON'. Press the UPPER RIGHT key pad once
for this selection. When selected, the money and/or
cycle counts will be viewable (if counter option(s) is
selected) when the coin box is removed.
Press the LOWER MIDDLE key pad once to advance

to next code.
12
EXPLANATION
CODE (selected)
1S
2S
3S
4S
5S
6S
7S
CODE
b. 05 VALUE OF COIN 1
b. 05 This represents the value of coin 1 in number of $0.05
increments of the larger coin value. 5 x $0.05 = $0.25.
By pressing the LOWER LEFT key pad, there is the
option of 1–199 for the quantity of $0.05 increments.
Press the LOWER MIDDLE key pad once to advance

to next code.
C. 20 VALUE OF COIN 2
C. 20 This represents the value of coin 2 in number of $0.05
increments of the larger coin value. 20 x $0.05 = $1.00.
PR MODELS ONLY: Factory default of $0.25.
C. 05
By pressing the LOWER LEFT key pad, there is the
option of 1–199 for the quantity of $0.05 increments.
Press the LOWER MIDDLE key pad once to advance

to next code.
d. 00
COIN SLIDE OPTION
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'. Replacement of meter case will be
needed for coin slide mounting.
d. 00 Not Selected 'OFF'.
d. CS Selected 'ON'.
NOTE: This option needs to be set to '00' unless
the meter case has been changed to accept a coin
slide device. Press the UPPER RIGHT key pad 3
consecutive times for this selection.
When coin slide mode is selected, set 'b'. equal to
value of vend price in $0.05 increments. Set set-up
code 6 xx (regular cycle price) and set-up code 3.xx
(special cycle price) to number of slide operations. If
the installer sets-up 'CS' and a coin drop mechanism
is installed, the washer will not register coins that are
inserted.

Press the LOWER MIDDLE key pad once to advance
to next code.
E. 00 ADD COINS OPTION
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'. This option causes the customer
display to show the number of coins (coin 1) to enter,
rather than the dollars-and-cents amount.
E. 00 Not Selected 'OFF'.
E. AC Selected 'ON'. Press the UPPER RIGHT key pad 3
consecutive times for this selection.

Press the LOWER MIDDLE key pad once to advance
to next code.
H. 00
COOL TEMPERATURE UPGRADE PRICE
COOL
H. 00 Increase from 0–200 by pressing the UPPER LEFT key
pad and decrease by pressing LOWER LEFT key pad.
Factory default for 0 coins = $0.00.

Press the LOWER MIDDLE key pad once to advance
to next code.
H. 00 WARM TEMPERATURE UPGRADE PRICE
WARM
H. 00 Increase from 0–200 by pressing the UPPER LEFT key
pad and decrease by pressing LOWER LEFT key pad.
Factory default for 0 coins = $0.00.

Press the LOWER MIDDLE key pad once to advance
to next code.
EXPLANATION