Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
CODE
H. 00
HOT TEMPERATURE UPGRADE PRICE
HOT
H. 00
Increase from 0–200 by pressing the UPPER LEFT key
pad and decrease by pressing LOWER LEFT key pad.
Factory default for 0 coins = $0.00.
Press the LOWER MIDDLE key pad once to advance
to next code.
H. 01
EXTRA RINSE UPGRADE PRICE
EXTRA
RINSE
H. 01
Increase from 0–200 by pressing the UPPER LEFT key
pad and decrease by pressing LOWER LEFT key pad.
Factory default for 0 coins = $0.00.
Press the LOWER MIDDLE key pad once to advance
to next code.
J. Cd
COIN/DEBIT OPTION
J.
Cd
Both coin and debit selected. Press the UPPER
RIGHT key pad 3 consecutive times for this selection.
J.
C_
Coins selected, debit disabled. Press the UPPER
RIGHT key pad 3 consecutive times for this selection.
J.
_d
PR models factory default to J._d. Debit Card selected,
coins disabled. Press the UPPER RIGHT key pad 3
consecutive times to change this selection.
J.
Ed
Enhanced Debit is self-selected when a Generation 2
card reader is installed in the washer. The Ed option
cannot be manually selected or deselected.
Press the LOWER MIDDLE key pad once to advance
to next code.
L. 00
PRICE SUPPRESSION OPTION
This option causes the customer display to show 'ADD'
or 'AVAILABLE' rather than the amount of money to
add. (Used mainly in debit installations.)
L.
00
Not Selected 'OFF. '
L.
PS
Selected 'ON. ' Press the UPPER RIGHT key pad once
for this selection.
Press the LOWER MIDDLE key pad once to advance
to next code.
n. CE
CLEAR ESCROW OPTION
When selected, money held in escrow for 30 minutes
without further escrow or cycle activity will be cleared.
n
00
Not Selected 'OFF'.
n
CE
Selected 'ON'. Press the UPPER RIGHT key pad once
for this selection.
Press the LOWER MIDDLE key pad once to advance
to next code.
r. 800 TOP SPIN SPEED RPM
r. 800
This can be selected from the following spin speeds:
600 rpm, 750 rpm, 800 rpm, 1000 (displays as 999)
rpm. Step between speeds by pressing the UPPER
RIGHT key pad. Factory default of 800 rpm.
Press the LOWER MIDDLE key pad once to advance
to next code.
EXPLANATION
CODE
U. 00
PENNY INCREMENT OFFSET
U. 00
This represents the penny increment price offset used
in Generation 2 (Enhanced Debit) PR models. Choose
from 0–4 pennies by pressing the LOWER LEFT key
pad.
Press the LOWER MIDDLE key pad once to advance
to next code.
A1. 03
PREWASH LENGTH
A1. 03
This is the number of minutes of PREWASH. Select
between 2 and 7 minutes by pressing the UPPER
LEFT key pad to increase or the LOWER LEFT key pad
to decrease.
Press the LOWER MIDDLE key pad once to advance
to next code.
A2. 03
FINAL SPIN LENGTH
A2. 03
This is the number of minutes of final high speed spin.
Choose from 3–8 minutes by pressing the UPPER
LEFT key pad to increase or the LOWER LEFT key pad
to decrease.
Press the LOWER MIDDLE key pad once to advance
to next code.
A3. 02
NORMAL CYCLE SETTINGS
A3. 02
Allows the owner to select the cycle default options of
Water Temperature, Prewash, and Extra Rinse.
See Table 1 for specific settings. Normal is set to 02
from the factory. The UPPER LEFT and LOWER LEFT
key pads change the values.
A4. 00
DELICATES CYCLE SETTINGS
A4. 00
Allows the owner to select the cycle default options of
Water Temperature, Prewash, and Extra Rinse.
See Table 1 for specific settings. Delicates is set to 00
from the factory. The UPPER LEFT and LOWER LEFT
key pads change the values.
A5. OF
POWERWASH CYCLE SETTINGS
A5. OF
Allows the owner to select the cycle default options of
Water Temperature, Prewash, and Extra Rinse.
See Table 1 for specific settings. POWERWASH is
set to OFF from the factory. The UPPER LEFT and
LOWER LEFT key pads change the values.
A3, A4,
Extra
Wash
Prewash
or A5
Rinse
Temp
00
Off
Off
Cold
01
Off
Off
Cool
02
Off
Off
Warm
03
Off
Off
04
Off
On
Cold
05
Off
On
Cool
06
Off
On
Warm
07
Off
On
EXPLANATION
Table 1
A3, A4,
Extra
Prewash
or A5
Rinse
08
On
Off
09
On
Off
0A
On
Off
Hot
0b
On
Off
0c
On
On
0d
On
On
0E
On
On
Hot
0F
On
On
Wash
Temp
Cold
Cool
Warm
Hot
Cold
Cool
Warm
Hot
13
Publicidad
Tabla de contenido
