Personalising A Programme; During The Stimulation Session - Compex performance Manual Del Usuario

6. Personalising a
programme
The programme personalisation screen is
not available for all programmes!
5a Press the On/Off button to return to the
previous screen.
5b Some programmes require manual selection
of the muscle group you want to stimulate. This
muscle group is shown in black on a small
figurine above channel 1. Use the channel 1 +/-
button to select your chosen group. The seven
muscle groups proposed are shown successively
in black on the small figurine:
vb
Abdomen and lower back
f
Buttocks
c
Thighs
j
Legs and feet
m
Forearms and hands
e
Shoulders and arms
td
Thorax and back
268
Current international standards
require that a warning be given
concerning the application of electrodes to
the thorax (increased risk of cardiac
fibrillation).
: If a cable fitted with the m-4
N.B.
system (sold separately) is connected to
the device, the muscle group is selected
automatically.
5c Press the channel 2 +/- button to stop the
warming-up sequence (closing the small
animated rising convection symbol above the
radiator).
5d Press the channel 3 +/- button to choose the
programme difficulty level.
5e Press the channel 4 +/- button to confirm
your choices and launch the programme.
7. During the stimulation
session
m-3
Preliminary
The m-3 test is launched only
if a cable fitted with the m-4 system
(sold separately) is already connected to
the stimulator when this is turned on!
t is essential that you remain completely
I
still and relaxed during the entire test.
f the m-4 system is connected, the
I
test starts immediately after programme
selection and personalisation.
test