Gazzini 10030302 Instrucciones De Uso página 18

IMPORTANT!
Risk of short circuit!
• Be sure to disconnect the battery before working on your
motorcycle's electrics—Risk of short circuit!
• Electrical and mechanical installation on the vehicle must be
carried out professionally. Incorrect installation can cause
short circuits or invalidate the type approval.
IMPORTANT!
Risk of damage!
• The electric cables must not be subjected to any tensile
forces, even when the steering is at full lock. The power
cables must be routed in such a way that they cannot chafe,
and they must not kink. If necessary, use a cable sheath or a
rubber cable feed-through.
• Any resistors that are installed may heat up during use and
therefore must not be installed in the direct vicinity of heat-
sensitive components or in closed housings. Depending on
how long they remain switched on the turn signals may reach
temperatures of 80°C or more. Only use resistors which have
a heat sink.
18