Bosch FWA 6620 Manual Original página 37

3.2.3 FWA 6820
FWA 6820 consists of a PC/laptop on a moveable trol-
ley, camera beams, post, power supply cable and mea-
surement boards.
Height adjustment camera beam:
¶
Automatic operation.
Abb. 3: Wheel aligner
1a Front right measurement board
1b Front left measurement board
2a Rear right measurement board
2b Rear left measurement board
3 Universal clamp
4 Printer (optional)
5 Trolley
6 PC/laptop
7 Post
8 Camera beam
9 Monitor
10 Pit monitor
The accessories package also contains a steering wheel
arrester, a brake clamp and two turntables.
!
Only use the original accessories produced by
manufacturer. The manufacturer is not liable for any
damage or injury caused by improper use.
!
Block trolley front wheels at the desired installation
location using both brakes.
Robert Bosch GmbH
Product description | FWA 6620 / 6720 / 6820 | 37
3.3 Components
Denomination Description
Camera beam The camera beam includes both 3D came-
ras. The camera beam is attached to the
post.
Height-adjustab- Height adjustment of camera beam:
R Manual FWA 6620.
le post
R Electric FWA 6720.
R Automatic FWA 6820.
Turntables The front wheels must be centrally positi-
oned on the two turntables to ensure free-
dom of movement during the measurement
procedure.
Measurement 4 different measurement boards (right front,
boards left front, right rear, left rear) are attached
to the wheels to receive LED light and re-
flect it back to the measurement cameras.
Universal clamp The 4 universal clamps are used to attach
the measurement boards to the vehicle
wheels.
Tab. 1: Components
en
|
1 690 706 113 2017-10-11