Product Description; Intended Use - Bosch FWA 6620 Manual Original

en 36 | FWA 6620 / 6720 / 6820 | Product description
3.

Product description

3.1

Intended use

The FWA 6620 / 6720 / 6820 is only to be used for
wheel alignment on passenger cars and light commer-
cial vehicles. Any other or additional application does
not constitute intended use.
3.2 Product description
3.2.1 FWA 6620
FWA 6620 consists of a PC/laptop in an open PC/laptop
station, camera beams, post, power supply cable and
measurement boards.
Height adjustment camera beam:
¶
Manual operation.
Abb. 1: Wheel aligner
1a Front right measurement board
1b Front left measurement board
2a Rear right measurement board
2b Rear left measurement board
3 Universal clamp
4 Monitor
5 Printer (optional)
6 Camera beam
7a 3D camera right
7b 3D camera left
|
1 690 706 113 2017-10-11
3.2.2 FWA 6720
FWA 6720 consists of a PC/laptop on a moveable trol-
ley, camera beams, post, power supply cable and mea-
surement boards.
Height adjustment camera beam:
¶
Electrical operation.
Abb. 2: Wheel aligner
1a Front right measurement board
1b Front left measurement board
2a Rear right measurement board
2b Rear left measurement board
3 Universal clamp
4 Printer (optional)
5 Trolley
6 PC/laptop
7 Post
8 Camera beam
9 Monitor
Robert Bosch GmbH