Fein Slugger JMU 137 QW Manual Del Usuario página 29

OBJ_BUCH-0000000355-002.book Page 29 Tuesday, March 12, 2019 4:36 PM
Repair and customer service.
Before mounting or replacing cutting tool or accessories, pull the power plug.
WARNING
This preventive safety measure rules out the danger of injuries through acciden-
tal starting of the power tool.
Exchangeable parts
If required, you can change the following
parts yourself:
Application tools, coolant container, contact
protector
Drill-motor guide (figure 19).
After several hours of operation, the play in the drill-motor guide can increase. As a conse-
quence, the drill motor can glide alongside the drill-motor guide by itself. Malfunctions are pos-
sible in machine operation. In this case, retighten all fastening screws of the drill-motor guide
correspondingly so that the drill motor can easily be moved manually, yet does not glide by
itself.
Fig. 19
2,5 mm /
3/32 in
2,5 mm /
3/32 in
en
2,5 mm /
3/32 in
29