Initial Setup; Setting Alarm Times - Microlife BP3AX1-4U Manual De Instrucciones

4.2. Initial Setup

When the batteries are installed, the display shows
the language selection screen.
Press L or M to select the display language. Press
OK (M) to confirm the selection. The default language
is English.
The device prompts you to set the time and date. The
year blinks highlighting the first field to change.
Press L or M to change the year. Press OK (M) to
confirm the date. The month, day, hour, and minute
are all consecutively highlighted. Press L or M to
change these fields and press OK (M) to confirm. You
are then prompted to set the alarms.

4.3. Setting Alarm Times

After you have set the time, you can set one or two
alarms to alert you to take your blood pressure
measurements. An alarm icon appears in the display.
Press L or M to set the hour and minute for Alarm 1.
Press OK (M) to confirm each setting.
When the alarm icon is highlighted, press L or M to
enable or disable
You are then prompted to set Alarm 2. Follow the
instructions for Alarm 1 to set this alarm.
After setting the alarms, press OK to exit the Time and
Date Setup. An alarm icon
indicate that the alarm is activated.
Attention!
The time display is set on a 24-hour clock.
Alarm 1. Press OK to confirm.
appears in the display to
Language
English
®
Deutsch
Francais
Russian
Espanol
Jan 1 2006
0:00
Display
Off
Feb 24 2006
8:15
Display
Off
Feb 24 2006
8:15
Display
Off
Feb 24 2006
10:30
Display
Off
7