Discontinuing A Measurement; Viewing Measurements Saved In Memory - Microlife BP3AX1-4U Manual De Instrucciones

5.6. Discontinuing a measurement

If it is necessary to interrupt a blood pressure measurement for any reason, for
example, if the patient feels ill, press the ON/OFF/START button. The device
immediately lowers the cuff pressure and enters into sleep mode.
6. Memory handling and user setting
6.1 Viewing Measurements Saved in
Memory
This blood pressure monitor automatically
stores each of the last 30 measurement
values. To view the stored measurements
for a user, press
last measurement taken for the user is
displayed.
The user, measurement sequence number,
date, and time are displayed on the top.
Data obtained in Microlife Averaging Mode
are indicated by a MAM symbol in the
upper right corner.
• Press or to scroll through the list items.
• The first item in the list is the average of all
stored data.
• Press OK and the display shows table of all
data.
• The first entry is the average. Data obtained in
Microlife Averaging Mode is indicated by an «A»
symbol at the very right.
• Press or to scroll through the list.
12
or in sleep mode. The
Indicates an average of
3 readings was used
Measurement
number
3/06
124
sys
dia
pul
3/06
No. sys
avg. 149
1 145
2 119
3 124
4 130
9 MAM
15:48
mmHg
73
mmhg
77
/min.
15:48
dia pul
110 85
109 83
71 74 A
73 79
80 77 A