Measurement Mode Selection (Microlife Averaging Mode Feature); Measuring Mode; Measurement Procedure - Microlife BP3AX1-4U Manual De Instrucciones

5.4. Measurement Mode Selection
Choose which measurement mode you want to use before taking a blood pressure
reading. Press OK (M) to enter the menus, press L or M to select Measuring
mode, and press OK (M) to enter the submenu Select , «1» or «3/MAM» for
Microlife Averaging Mode with the scroll buttons and confirm your selection by
«OK».

MEASURING MODE

Microlife Averaging Mode Technology
1 3/MAM
In average mode, the unit takes 3 continuous
measurements, and afterwards calculates the
result based on an average using Microlife
Averaging Mode Technology (see Section 2.4).
There is a 15-second rest time between
measurements; the unit beeps during the last 5
seconds to remind you of the upcoming
measurement.
Single Mode
In single mode «1», only one measurement is taken.

5.5. Measurement Procedure

After the cuff and arm have been appropriately
positioned and the measurement mode is set, the
measurement can be taken as follows. Press the
ON/OFF/START button. The Welcome screen
Hold left wrist at heart level
and remain still during
appears, and is followed by a screen which shows
measurement.
you how to properly hold your arms. If the display
off function is enabled, the Sleep Mode screen
appears for two seconds before
measurements are taken.
The pump begins to inflate the
cuff and the increasing cuff
pressure is displayed.
10