Device Application - Orthofix SPINAL-Stim Manual De Instrucciones

Device Application

Putting on the Spinal-Stim for the First Time
Applying the Spinal-Stim for the first time is easy. And wearing the Spinal-Stim
is comfortable if applied correctly. The Spinal-Stim may be worn over cloth-
ing, a brace or orthotic device. For first time use, follow the steps below.
Step 1:
Put the Spinal-Stim around the
body to determine whether belt
adjustment is needed. When
properly adjusted, the device
should be centered over the
treatment site, and feel comfortable
and secure. The control unit should
be in front and on top as shown.
Step 2:
If significant belt adjustment is
needed, lay the unit face down with
the control unit on the table surface.
Step 3:
Release the latch.
Step 4:
Open the unit fully.
Step 5:
Open the Velcro
7
®
flap.