Descargar Imprimir esta página

HP Photosmart 8700 Serie Guia De Inicio Rapido página 9

Ocultar thumbs Ver también para Photosmart 8700 Serie:

Publicidad

Imprima uma página de configurações
de rede
Siga as instruções no apêndice Rede do
Guia do Usuário para imprimir uma página
de configuração de rede. Você talvez
necessite das informações nessa página
durante a instalação do software.
Instale o software da impressora
Você deve instalar o software em todos os
computadores que utilizarão a impressora
HP Photosmart.
1. Insira o CD do software da HP Photosmart
no computador e siga as instruções
na tela.
2. Na tela Tipo de conexão, selecione
Through the network (Através da rede)
e clique em Avançar. A tela de pesquisa
será exibida.
3. Selecione uma impressora a ser instalada:
Se a tela Impressora encontrada for
exibida, selecione Sim, instale
a impressora e clique em Avançar.
Se a tela Impressora não encontrada
for exibida, clique em Avançar e siga
as instruções na tela para localizar a
impressora.
Se a tela Check Cable Connection
(Verificar conexão do cabo) for exibida,
consulte o apêndice Rede do Guia do
Usuário para obter instruções detalhadas
sobre a rede e como atribuir um endereço
IP estático.
4. Quando solicitado, clique em Concluir
para sair da instalação.
Windows only
English
®
Windows
98, Me, 2000 Professional,
XP Home, XP Professional
For Windows USB installation, see page 11.
Note: Keep the Networking appendix of the
User's Guide nearby to use as a reference
during installation.
You need the following to connect the printer
to the network:
• A CAT-5 Ethernet cable equipped with an
RJ-45 plug. (This is not the same as a USB
cable or a regular phone wire, the use of
which can damage the printer or other
network devices.)
• A network access point such as a hub,
router, or switch with an open port.
Connect the network cable
1. Connect one end of the Ethernet cable to
the back of the printer.
2. Connect the other end of the Ethernet
cable to an empty port on the hub, router,
or switch.
Do not connect the printer directly to a
computer using an Ethernet cable. Peer-to-
peer networking is not supported.
Print a network configuration page
Follow the instructions in the Networking
appendix of the User's Guide to print a
network configuration page. You may need
the information on that page during software
installation.
Install the printer software
You must install the software on every
computer that will print to the HP Photosmart
printer.
1. Insert the HP Photosmart software CD into
the computer and follow the onscreen
instructions.
2. On the Connection Type screen, select
Through the network, then click Next.
The Searching screen appears.
3. Select a printer to install:
If the Printer Found screen appears, select
Yes, install this printer and click Next.
If the Printer Not Found screen appears,
click Next and follow the onscreen
instructions to locate the printer.
If the Check Cable Connection screen
appears, refer to the Networking
appendix of the User's Guide for detailed
network installation instructions and for
instructions on assigning a static
IP address.
4. When prompted, click Finish to exit the
installation.
9

Publicidad

loading