Roll Groover Safety; Description, Specifications And Equipment Description; Specifications; Standard Equipment - RIDGID 914 Manual Del Operador

914 In Place Roll Groover

Roll Groover Safety

1. Keep fingers away from rolls when grooving pipe.
They can become pinched resulting in serious injury.
2. Do not wear loose fitting gloves. Can become
caught in rolls resulting in serious injury.
3. Handle pipe carefully and have all burrs removed
from ends. Eliminates the risk of cuts to fingers and
hands.
4. When working overhead, all personnel should be
clear of the area below. Prevents serious injuries if
roll groover or workpiece falls.
5. Groover is designed to manually roll groove pipe
and tubing. Other uses may result in injury.
6. Do not use power activated devices to aid in ro-
tating the groover. Using a tool in a manner not
intended can result in injury.
SAVE THESE INSTRUCTIONS!
Description,
Specifications and Equipment
Description
The RIDGID No. 914 Roll Groover is designed to man-
ually form standard roll grooves on pipe or copper tube
that is installed. The 914 is lightweight, only 18 lbs.,
and capable of grooving steel, stainless steel, PVC and
" to 6". The 914 can roll groove
aluminum pipe from 1 1 /
4
2" to 6" copper tube (Type K, L, M, and DWV) by chang-
ing the standard roll set with the optional roll set for
" hand ratchet rotates a feed screw that
copper. The 1 /
2
advances a groove roll into the pipe/tube to form a
groove that meets specifications required for mechanical
coupling systems.

Specifications

Pipe Capacity ................1
1
Table II for wall thickness)
Copper Tube Capacity ..2" to 6" OD.
(Type K, L, M, DWV.)
Depth Adjustment..........Feed Screw w/
Drive
Actuation ...................... 1 /
tion
Weight ..........................18.2 lbs. (8.3 kgs.) Ratchet
included
" to 6" Schedule 10
1 /
4
" to 4" Schedule 40 (see
1 /
4
" Female
1 /
2
" Ratchet for feed and rota-
2
Ridge Tool Company • Elyria, Ohio • U.S.A.

Standard Equipment

Model 914 ...............Groove set for 2" to 6" Schedule
10 2" to 4" Schedule 40
" Drive Ratchet w/button release
1 /
2
" and
3 /
16
changes and stabilizer pads
Operator's manual
Figure 1

Accessories

" to 1
• Groove set for 1 1 /
4
• Copper groove set for 2" to 6" OD.
Type K, L, M, DWV.
Figure 2
NOTE! The 914 can be converted to groove copper by
changing the groove set and stabilizer pads.
" hex key for groove set
5 /
16
" Schedule 10 & 40 pipe
1 /
2
Stabilizer Pads
Groove Set
3