Dismounting; Disposal; Materials; Consumables - Abicor Binzel BRS-LC Instructivo De Servicio

Ocultar thumbs Ver también para BRS-LC:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

10 Dismounting

10 Dismounting
Dismounting may only be carried out by qualified personnel. Please make sure that the shutdown
procedures are strictly observed, before the dismounting work begins. Make sure to include also the
components integrated into the welding system.
Risk of injury due to unexpected start-up.
For the entire duration of maintenance, servicing, dismounting and repair work, the following instructions
must be adhered to:
• Interrupt the power supply
• Interrupt the compressed-air supply.
NOTE
• Observe the information given in chapter 7 Putting out of operation on page EN-15.
1 Unscrew the screws and remove the cleaning unit and the collecting tray.
2 Unscrew the screws and the assembly stand from the floor.

11 Disposal

For the maintenance station BRS-LC to be properly disposed of, it first must be dismounted. For disposal,
observe the local regulations, laws, provisions, standards and guidelines.
 See chapter 10 Dismounting on page EN-17

11.1 Materials

This product consists for the most part of plastics, steel and non-ferrous metals. Steel and non-ferrous metals
can be molten in steel and iron works and are thus almost infinitely recyclable. The plastic materials used
are marked in preparation for sorting and separation of the materials for later recycling.

11.2 Consumables

Oil, grease and cleaning agents must not contaminate the ground or enter sewage systems. These materials
must be stored, transported and disposed of in suitable containers. Observe the relevant local regulations
and disposal instructions of the safety data sheets specified by the manufacturer of the consumables.
Contaminated cleaning tools (brushes, rags, etc.) must also be disposed of in accordance with the
information provided by the manufacturer of the consumables.

11.3 Packaging

ABICOR BINZEL has reduced the packaging for shipping to a minimum. Packaging materials are always
selected with regard to their possible recycling ability.
EN - 17
DANGER
BRS-LC

Publicidad

Tabla de contenido
loading

Tabla de contenido