Nameplate - Abicor Binzel BRS-LC Instructivo De Servicio

BRS-LC
Activation
Power consumption
Tab. 5
1 output of inductive proximity switch NO (pnp)
Operating voltage
Allowed residual ripple
Permanent current
Current consumption
Voltage drop
Tab. 6
NOTE
To guarantee the maximum power and useful life of the torch maintenance station, operate it with clean
and oiled air.
 Tab. 7 Cleaning station BRS-LC on page EN-4
Pneumatic motor / nominal speed with oiled air
Nominal speed with unoiled air
Air consumption
Tab. 7
Injection unit VI
Tab. 8
Cutting capacity at 6 bar
Solid wire
Filler wire
Cutting time
Tab. 9
2.4 Abbreviations
BRS-LC
VI
TCP
Tab. 10

2.5 Nameplate

The maintenance station BRS-LC is labelled with a nameplate on the housing.
When making any inquiries, please remember the following information:
• Device type, device number, ID number, year of construction
2.6 Classification
The warning signs used in the operating instructions are divided into four different levels and are shown prior
to specific work steps. Arranged in descending order of importance, they have the following meaning:
Inputs for activating the directional valves
Electrical system - terminal block
Cleaning station BRS-LC
Injection unit VI
Wire cutting device DAV (option)
Cleaning station
Injection unit
Tool Center Point
Abbreviations
2 Product Description
4 inputs of the 5/2 directional valves
24 V DC
4,5 W
10 - 30 V DC
Vss < 10 %
max. 200 mA
approx. 4 mA (24 V)
approx. 1.2 V (200 mA)
approx. 650 rpm
approx. 550 rpm
approx. 380 l/min
1 litre
up to 1.6 mm
up to 3.2 mm
0,5 seconds
EN - 4