User Instructions; Operation Modes - Perry TE526 Manual Del Usuario

Termostato digital de superficie
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

4 - USER INSTRUCTIONS

4.1 - OPERATION MODES

The thermostat has 5 operation modes:
Display
symbols
WINTER
= heating (default setting)
with COMFORT temperature
Winter night-time reduction = heating
EN
with REDUCTION temperature (energy saving)
Thermostat off
- In heating mode: antifreeze temperature mode is
activated (if not excluded during setting)
- In cooling mode: the system is completely
deactivated
SUMMER = cooling
with COMFORT temperature
Summer night-time reduction = cooling
with REDUCTION temperature (energy saving)
note: follow directions in the next paragraph to pass from one operating
mode to another.
The figures below show how to switch from the
s
example: heating mode activated
T
Set
ON
Press any area on the touch screen display
(to see keys)
important: always press inside the 4 sensitive areas (the grey vertical lines indicate the separation between one area and another and are not sensitive to touch)
28
Operation modes
WINTER
T
Set
ON
Mode
press the
5 seconds
IMPORTANT!
Upon first touch at any point (marker) on the touch
screen display, the keys will light up. Press the keys or the
relative area within the 5 seconds, as per the following
procedure:
4.2 - CHANGING OPERATION MODE
Changing from COMFORT temperature to REDUCTION
temperature and vice versa
Press the
Mode
button
temperature will blink. Press
Changing from NORMAL OPERATION to
Press the
Mode
button
temperature set only in Winter mode)
Press
OK
within 5 seconds to confirm.
Changing from WINTER to SUMMER and vice versa
Press the
Mode
button
and set temperature will blink.
Press
OK
within 5 seconds to confirm.
OFF
Changing from
Press the Mode
button
mode.
mode in COMFORT temperature o the relative REDUCTION temperature
OK
Mode
key once within
once
and the relative symbol and set
OK
within 5 seconds to confirm.
OFF
twice
and
(
and the anti-freeze
will blink.
three times
and the relative symbol
to NORMAL OPERATION
once
to return to the previous operation
, t
T
Set
ON
Mode
Press
OK
within 5 sec. to confirm.
OK

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido