Programmable Functions - Perry TE526 Manual Del Usuario

5 - PROGRAMMABLE FUNCTIONS

5.1 - ACCESS TO THE PROGRAMS
It is recommended to give access to the programs
to the installer or expert users
some settings can compromise the proper
functioning of the system.
T Set
Press any area on
the touch screen
display (to see keys)
Keep the Mode
T
Set
button pressed
for 4 sec.
you cannot access
thermostat programming
in mode.
Mode
keep pressed for 4 sec
S E T P R O G
appears on the
display for a few
moments.
Mode
The thermostat
screen will now
d i s p l a y t h e
t e m p e r a t u r e
reading correction.
Mode
After accessing the programming menu (paragraph 5.1), the
since a change in
following parameters/functions can be set and/or modified
(described in the same order in the following paragraphs):
OK
USING KEYS INSIDE THE PROG. MENU:
- Quickly press the "
the next.
- press the key
OK
save it by briefly pressing the
next function.
- To exit from programming
"OK" key pressed for 4 seconds.
note: 60 seconds (time-out) after the last key (marker) is pressed within the
programming menu, the thermostat will return to normal operation (if you do
not want to save changes, do not confirm with the OK key).
OK
Correction of the detected room temperature
Blocking the maximum temperature settings
Blocking the minimum temperature settings
Selecting the temperature adjustment method:
ON/OFF DIFFERENTIAL or PROPORTIONAL
Hysteresis setting (for Thermal differential).....................
Cycle duration setting (for Modulating proportional)...........
Adjusting or excluding the anti-freeze protection
Mode " key to pass from one function to
or modify the desired parameter
OK
and confirm changes,
(OFFSET) ...(Par. 5.2)
EN
(Winter)......(Par. 5.3)
(Summer)....(Par. 5.3)
...........(Par. 5.5)
.........(Par. 5.6)
....(Par. 5.7)
. ............(Par. 5.8)
and
key and pass on to the
keep the
31