Perry TE526 Manual Del Usuario página 32

5 - PROGRAMMABLE FUNCTIONS
5.2 - CORRECTING THE DETECTED ROOM TEMPERATURE
If for any reason the thermostat must be installed in a position
where the detected temperature can be affected (e.g. an
external wall, which is generally colder than the rest of the
house in winter), an Offset value (correction value) can be set
for the detected room temperature and this correction can be
set from -2 °C to +2 °C.
EN
Mode
Mode
32
Press the or button
to change the current
setting.
OK
Press OK to save and
m o v e o n t o t h e
subsequent setting or
keep the button pressed
for at least 4 sec to save
the new setting and exit the
programming menu.
OK
5.3 - BLOCKING TEMPERATURE SETTINGS
MAX (winter) and MIN (summer)
In some particular installations, for instance in public offices,
hotels, etc., it may be useful to limit the thermostat comfort
temperature settings to avoid incorrect settings being entered
by unauthorised personnel.
It is therefore possible to limit the maximum Set temperature values
if the thermostat is in Winter
Set temperature values if the thermostat is in
The basic setup does not contain any blocked settings.
Example: blocked Comfort maximum temperature setting for the
Winter mode (heating)
Mode OK
Mode OK
(heating) or , to limit the minimum
Summer (cooling).
Set the blocked value of the
maximum temperature via
the or button.
Press OK to save and
move on to the blocked
Cooling setting or keep the
button pressed for at least
4 sec to save the new
setting and exit the
programming menu.
continued