Acoustic Signal:
The acoustic signal (1 Hz intermittent) sounds at the end of the set time for a period of 7 minutes. Press any
button to stop the acoustic signal. During the acoustic signal, the frequency of the sound can be adjusted by
-
keeping the Decrease
Programme Start and Check:
Every set programme is activated only after the cooking time is set. The start time can be checked whenever
required by selecting the previously selected function.
Identification of Setting Errors:
The setting is incorrect if the current time falls within the set cooking period, i.e. between cooking start and
end time. A wrong setting will be indicated by an acoustic signal and flashing of the symbol
setting can be corrected by changing one of the two cooking times.
Programme cancellation:
A cooking programme can be cancelled by selecting the Manual function. Likewise, when the set programme
ends on its own, it is automatically cancelled for future operations.
MANUAL PROGRAMMER: PUSH-PULL for Model MAM 82M XS
MANUAL OPERATION: Press the knob to raise it. Turn the knob anticlockwise to the "Hand" manual
symbol. See figure 10.
IMPORTANT: If the knob is left on Manual mode and a cooking programme is selected, the oven stays on
continuously.
COOKING PROGRAMME OPERATION: Turn the knob clockwise and select the required cooking time. At
the end of the cooking time the oven switches off automatically and a ringer sounds.
CHILD SAFETY FUNCTION (LOCK) – when provided for
This additional function is used to lock the electronic programmer buttons, when the oven is operating and as
a preventive measure when it is off. It is shown by the special symbol (key).
When activated, this function prevents children or others from modifying the previously set programme or
switching on the oven, if off, by pressing the programmer buttons.
When this safety lock is activated, any signalling by the programmer during oven operation can be eliminated
by pressing any of the buttons. The safety lock will remain activated.
To activate or deactivate this child safety function (lock), proceed as follows:
3) To activate: press the + button and hold it down for at least 3 seconds until the symbol (key) showing
this function appears on the programmer screen.
4) To deactivate: press the + button and hold it down until the symbol (key) disappears from the
programmer screen.
NOTE: To display the remaining cooking time it is necessary to deactivate the lock.
OVEN TEMPERATURE THERMOSTAT: See figure 11.
The oven thermostat controls the required cooking temperature, with all oven operation selections.
The heating elements switch on and off to maintain the set temperature.
For Model MAN 82M XS; to activate the Push-Pull knob, press the knob to raise it.
button pressed. Three different frequencies can be selected.
8
9880020300 I FRANKE 050508
"A"
The wrong
.