Analog Cooking Programmer - Franke SMART PLUS SGP 62 M Serie Manual De Instalación Y Servicio

Ocultar thumbs Ver también para SMART PLUS SGP 62 M Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 72
SGP 62 M _/F / SMP 62 M _/F / SMP 66 M _/F / CF 65 M _/F
GRILLING
The grill heating element at the top of the oven switches
on. In this case the fast radiant surface cooking keeps
the meat tender on the inside; the grill can also be used
to quickly toast up to 9 slices of bread. The Franke oven
is designed to grill food with the oven door completely
closed.
Note: The grill heating element is very hot when in use;
be careful not to touch it accidentally when handling food
inside the oven. In any case, Franke has designed the oven
opening to protect hands as much as possible.
TURBO GRILL COOKING
The grill heating element at the top of the oven and the
fan are activated. It combines one-way heat radiation with
forced air circulation inside the oven. This prevents the
surface of the food from burning and allows the heat to
penetrate deeper. Excellent results are obtained using the
turbogrill for mixed meat and vegetable kebabs, sausages,
spare-ribs and lamb chops, broiled chicken, quail with
sage, pork fillets, etc.

Analog cooking programmer

(Fig. 1c)
This clock is already set for manual oven use,
therefore cooking is possible even without
adjusting it.
Knob  
X
X
Press the knob to select in sequence
the functions to be activated (timer, end
of cooking, cooking start, time setting),
signalled by the respective LED blinking.
TIMER
STOP
START
X
X
Press this knob briefly to check already
programmed settings (Query), or press it for
about 2 seconds to cancel settings (Reset).
X
X
Turn the knob to set the hands of the time
clock for the function activated
(LED blinking).
LEDs
9 Blinking: ready for setting or signalling end
of function (together with the ringer).
9 Lit: function running.
Timer
X
X
To set the timer, press the knob once (the
corresponding LED begins to blink); then
turn the knob to move the hands in order to
set the timer duration.
X
X
Press the knob again to confirm the setting;
the corresponding LED changes from
blinking to steady.
The hands will then return to their
original position to indicate the current
time: when the set time is reached,
the ringer sounds. This sound can be
stopped by pressing the knob.
The timer does not control oven
heating.
End of cooking
X
X
To set the end of cooking time, press the
knob twice (the LED for the
– 9 –
The thermostat knob (D)
should normally be set to
max. 220°C, however a
lower temperature can be
set, in which case grilling
will be slower.
The thermostat knob (D)
should normally be set to
max. 220°C, however a
lower temperature can be
set, in which case grilling
will be slower.
symbol
EN

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Smart plus smp 62 m serieSmart plus smp 66 m serieCountry flat cf 65 m serie

Tabla de contenido