Introduction; Proper Use; Features And Equipment; Included Items - Parkside PDOS 200 A1 Instrucciones De Utilización Y De Seguridad

Introduction

The following pictograms are used in these operating instructions / on the device:
Read instruction manual!
Observe caution and safety notes!
Caution – electric shock!
Danger to life!
Risk of explosion!
Risk of fire!
V ~
Volt (AC)
Double bench grinder PDOS 200 A1
For grinding and sharpening metal tools
Introduction
Q
Please make sure you familiarise your-
self fully with the way the device works
before you use it for the first time and
that you understand how to handle electrical power
tools correctly. To help you do this please read the
accompanying operating instructions. Keep these
instructions in a safe place. If you pass the device
on to anyone else, please ensure that you also pass
on all the documentation.

Proper use

Q
The double grinding machine is intended for grind-
ing and sharpening metal tools such as drills, chisels
etc. and metal items. The device is not intended for
commercial use. Any other use or modification to
the device shall be considered as improper use
and could give rise to considerable dangers.
The manufacturer will not accept liability for loss or
damage arising from improper use.
32 GB/MT
W
Watts (effective power)
Wear hearing protection, dust
protection mask, protective glasses
and protective gloves.
Keep children away from electrical
power tools!
Risk of loss of life by electric shock from
damaged mains lead or mains plug!
Dispose packaging and appliance in
an environmentally-friendly way!

Features and equipment

Q
Magnifying glass
1
Eye guard mount
2
Eye guard
3
Grinding wheel
4
Workpiece / tool rest
5
Adjuster screw for workpiece / tool rest
6
Wheel guard cover
7
Mounting holes
8
On / OFF switch
9
Machine-side flange
10
Left-hand thread
11
Outside flange
12
nut
13
Fastening screw
14

Included items

Q
Check that all the items and accessories
are present immediately after unpacking
the device:
1 Double bench grinder PDOS 200 A1 with
- 2 x eye guard mounts / eye guards
- 2 x workpiece / tool rests / adjuster screws
1 Operating instructions