Auto Pan/Patrol/Trace Screen - JVC TK-C676 Instrucciones

AUTO PAN/PATROL/TRACE Screen

This screen sets up the auto pan function for slow panning, the auto patrol function for switching of positions in sequence, and the
auto trace function for the reproduction of the results of manual camera operations.
Item
AUTO PAN MODE Determines movement during auto panning.
RETURN : Moves continuously between start and return positions.
RIGHT
LEFT
P. 34, "AUTO PAN Setup"
AUTO PAN SPEED Sets the rotation speed during auto panning.
LOW
NORMAL : Normal speed.
HIGH
A. PAN START Sets the auto panning start position.
POS. SET..
A. PAN RETURN Sets the auto panning return position.
POS. SET..
AUTO PATROL SET Sets the configuration of the auto patrol function.
P. 35, "AUTO PATROL Setup"
AUTO TRACE SET Sets the configuration of the auto trace function.
P. 36, "AUTO TRACE Setup"
RM. A. PAN KEY Determines the function activated by pressing the AUTO PAN button on the remote
control unit.
A. PAN
A. PATROL
A. TRACE
RM. A. PATROL KEY Determines the function activated by pressing the AUTO PATROL button on the re-
mote control unit.
A. PAN
A. PATROL
A. TRACE
Function & Setting
: Clockwise rotation
: Counterclockwise rotation.
: Low speed.
: High speed.
: Auto pan function.
: Auto patrol function.
: Auto trace function.
: Auto pan function.
: Auto patrol function.
: Auto trace function.
Initial Value
RETURN
NORMAL
–
–
–
–
AUTO PAN
AUTO PATROL
E-27