Table 4: Mounting The Evosta3 Connector - DAB EVOSTA2 Instrucciones Para La Instalación Y El Mantenimiento

Phase
Unscrew the cable gland nut
and extract the terminal board
Action
from the connector, releasing it
from the side clips.
Illustratio
n
Phase
Insert the wired terminal board
in the cable gland, securing it
Action
with the side clips. Screw on
the locking nut.
Illustratio
n
ENGLISH
EVOSTA3
1
Rotate the terminal board
through 180°.
4
Connect the wired
connector to the pump,
securing it with the rear
hook.

Table 4: Mounting the Evosta3 connector

39
2
Fit nut and connector on the
cable. Strip the wires as
indicated in the figure.
Connect the wires to the
terminal board, respecting
the phase, neutral and earth
5
3