Installation Procedure; Drive Mounting - Franklin Electric MonoDrive Connect N3R Manual Del Propietário

Installation Procedure

Drive Mounting

The SubDrive/MonoDrive unit should be mounted on a surface or backplate no smaller
than the outer controller dimensions in order to maintain the NEMA 3R rating. The controller
must be mounted at least 18" (45.7 cm) off the ground.
The controller is mounted using the hanging tab on the top side of the enclosure, as
well as two (2) additional mounting holes on the back side of the controller. All three (3)
screw hole locations should be used to ensure the controller is securely mounted to the
backplate or wall.
250,5
[9.86]
"A"
"B"
MODEL "A"
SubDrive15, 464.2
MonoDrive [18.28]
SubDrive20,
539.4
SubDrive30,
[21.24]
MonoDriveXT
539.4
SubDrive50
[21.24]
All manuals and user guides at all-guides.com
"C"
"D"
"B" "C" "D" "E"
355.2 454.7 427.4 157.4
[13.98] [17.90] [16.83] [6.19]
430.4 529.9 502.6 157.4
[16.94] [20.86] [19.79] [6.19]
430.4 529.9 416.2 168.4
[16.94] [20.86] [16.39] [6.63]
SubDrive/MonoDrive Connect
"E"
133,9
[5.27]
53,9
[2.12]
11
[0.43]
53,2
[2.09]
2X 7,7
140
[0.31]
[5.51]
23