CAPITAL SPORTS Helix Stride Manual De Instrucciones página 61

Step 6: swing linkage assembly
Plastic
material
Refer to left, gently remove plastic packaging material from two Axles.
Be sure not to remove the washers that already installed inside while
removing packaging material.
Follow the left image to adjust the Crank Axle
(001a) to the bottom, this will make the Crank
and Swing Linkage (44/52) easy to assemble.
Washer
Remove the Cable Tie (a)
from the Crank & Swing
Linkage
(44/52).
Washer
EN
61