CAPITAL SPORTS Helix Stride Manual De Instrucciones página 62

EN
62
Washer
Refer to left, the
Swing Linkage (52)
has left and right side.
There is "F" decal on
each side. Make sure
"F" decal faces to the
item while assembly.
Attach the Swing
Linkage (52) to the
Crank Axle (001a).
Attach the Crank Linkage (44) to the
Swing Arm (01b). Refer to below,
make sure the Axle surface is lower
than the Bearing surface.
Axle
Bearing
Bearing
Axle
Fully tighten 2 pcs Washers (77), 2
pcs Tube Caps (46) and 2 pcs Socket
Bolts (98) onto Crank and Swing
Linkage (44/52).