Functional Description; Commissioning - Festool PLANEX LHS 2 225 EQI Manual De Instrucciones Original

Lijadora de pared
Ocultar thumbs Ver también para PLANEX LHS 2 225 EQI:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

English
Long-reach sander
Backing pad diameter
Abrasive diameter
Dust extraction con­
nection
Frequency
Equivalent Isotropically
Radiated Power (EIRP)
Short version length
(without extension
tube)
Long version length
(one extension tube)
Weight as per EPTA-Procedure 01:2014
Long version (one ex­
tension tube)
Short version (without
extension tube)
6

Functional description

[1-1]
Handle
[1-2]
Bluetooth
[1-3]
LED indicator
[1-4]
Surface control light button
[1-5]
On/off switch
[1-6]
T-handle
[1-7]
Hose clip
[1-8]
Handle
[1-9]
Speed control
[1-10]
Plug-it connection
[1-11]
Extractor connector
[1-12]
Suction sleeve stop
[1-13]
Locking lever
[1-14]
Extension tube
[1-15]
Suction regulator
[1-16]
Sanding head
[1-17]
Surface control light
[1-18]
Backing pad
[1-19]
Interface pad
10
LHS 2 225 EQI
8-21/32" (220 mm)
8-27/32" (225 mm)
1-7/16" (1-1/16"),
36 mm (27 mm)
2402 Mhz –
2480 Mhz
<10 dBm
47" (1.2 m)
65" (1.65 m)
10.4 lbs (4.7 kg)
8.8 lbs (4 kg)
®
button
[1-20]
Plug-it mains power cable
[1-21]
Insulated gripping surfaces
The pictures for the functional description are
on a fold-out page at the beginning of the in­
struction manual. While reading the manual
you can fold out the page for comparison and
quick reference.
7

Commissioning

WARNING
Risk of injury, electric shock
► Always disconnect the mains plug from the
socket before performing any work on the
machine.
7.1
Assembling/disassembling
WARNING
Incorrect installation
Risk of injury from falling parts and loss of
control
► Before switching on the power tool, make
sure that all locking levers are completely
closed.
Assembly [2]
The long-reach sander consists of a
LHS 2 225 EQI handle [1-1], a maximum of two
extension tubes EXT-LHS 2 225 [1-14] and a
sanding head TOP-LHS 2 225 [1-16].
Push the pipe end of the sanding head
into the opening on the handle as far as it
will go.
Turn the locking lever [2-1] towards the
sanding head as far as it will go.
► Check whether the handle and sanding
head are firmly connected by pulling them
apart.
The handle and sanding head are securely con­
nected.
Assemble the extension tubes in the same way
as the handle.

Publicidad

Tabla de contenido
loading

Tabla de contenido